The specification standard behind honest ductwork pricing.
If you have read a ventilation tender or a ductwork quote in the UK, you have probably met the phrase "to DW/144". It is the industry specification for sheet metal ductwork - the document that defines how duct should be constructed, stiffened, jointed, supported and tested, so that everyone pricing a job is pricing the same thing.
That last part is the point. Ductwork is mostly hidden above ceilings and in risers, which makes it tempting territory for quiet cost-cutting: lighter gauge metal, fewer supports, joints that look fine but leak under pressure. Two quotes can describe the same drawing and be hundreds of pounds apart because one of them is not really building to the standard.
For the client, the practical meaning of DW/144 shows up in three places. Air leakage: duct built and sealed to the standard holds its pressure class, which means the air you paid to move actually arrives at the grilles. Longevity: correct gauge and support means the system does not rattle, sag or shake itself loose over the years. And test evidence: the standard defines how ductwork is pressure tested, so compliance is something you can see in the commissioning file rather than take on trust.
What to ask a ductwork contractor: is the quote to DW/144, what pressure class is the system built and tested to, and will the test results be in the handover documentation. Straight answers to those three questions tell you most of what you need to know about who you are dealing with.
KTR supplies and installs ductwork to DW/144 as standard, with test results documented at handover - as part of full ventilation systems or as a ductwork-only package for M&E contractors.